Use just one cart for a quick 2-pallet transfer or load a train of carts and go “lights-out”.

Can be used with just one pallet cart for a quick 2-pallet transfer or can be expanded by using multiple carts* depending on your production needs. Each cart holds two (2) pallets and connects to additional carts with T-pins allowing for continuous part transfer into the machine tool. The operator can load a train of carts* to run while they attend to other tasks or go "lights-out".

• Easily load and unload pallets onto carts without obstruction.
• Interlocked pallet carts are mobilized through the shuttle system on casters allowing the shuttle arm to continuously feed pallets into the 5-Axis machining center. 
• Once a cart is pushed through the other side, the operator can easily load new pallets and change parts while the spindle is cutting.
• A completed pallet cart can be removed by unlocking the T-pins and rolled to a different location or to the opposite end of the train to keep production going.
• Depending on programming, after the full “pallet cart train” passes through the shuttle, the process repeats sending carts back in the opposite direction. 

Specifications:

• 15” (381mm) dia. cast aluminum pallets.
• 150 lb (68kg) capacity per pallet.
• Cast iron receiver does not require air. 
• +/- .0001" (.0025 mm) repeatability.
• Automated access door retrofit to the machining center.
• PLC is fully integrated with the machine.

Automatic Pallet Changer System with Pallet Carts includes:

1 – APCC15 Shuttle and Automatic Door (retrofit to the machining center)

1 – Cast Iron Receiver Base, 150 lb. capacity (with weight evenly distributed)

2 – 15” (381 mm) dia. x 1.25” (31.75 mm) thick Cast Aluminum Pallets

1 – Pallet Cart* with interlocking T-pins (holds 2 pallets) 

CE Light Curtain package with shuttle guarding via a light emitter, mirrors and sensor

Additional carts* and pallets sold separately

For more information

Call or complete our online contact form today.